Home  ›  Review of Peavey Pvxp Sub 15 800 Watt Powered Sub

Review of Peavey Pvxp Sub 15 800 Watt Powered Sub

Written By ۱۴۰۱ اردیبهشت ۱, پنجشنبه Add Comment Edit
  • Print

OVERVIEW

Lightweight and heavy duty.

Peavey Electronics set the standard for affordable, feature-packed powered P.A. solutions more than than four decades ago. The new Peavey PVX Serial of active and passive loudspeakers are the culmination of decades of R&D and experience building the best portable, all-in-one sound solutions--bringing legendary Peavey performance and reliability to audio pros and musicians of all levels.

FEATURES

  • 15" heavy-duty woofer
  • Internal line level low-laissez passer/loftier-pass crossover network
  • Fully adjustable KOSMOS C for increased bass impact
  • XLR/one quarter inch combo jack input
  • Power amp has forced air cooling for maximum reliability
  • Large heavy-duty locking casters
  • Perforated steel grill
  • Steel handles
  • T-nut woofer mounting
  • Rugged dado and rabbet construction plus internal braces for lightweight yet stiff cabinet
  • 850 watts peak available ability
  • Compact dimensions for a 15" woofer based sub
  • Threaded pole for top speaker mount
  • Ii high-pass XLR outputs, 1 full range thru XLR output

Add a sub to your system. You lot won't believe the difference. Social club soon.

SPECIFICATIONS

  • Frequency Range, one meter on-centrality, swept-sine in 1„2 Space environment: 51 Hz to 20 kHz
  • Frequency Response, i meter on-axis, swept-sine in anechoic environment: 57 Hz to xx kHz (±3 dB)
  • Usable Low Frequency limit (-10 dB point anechoic): 51 Hz Nominal sensitivity (1W @1M, swept sine input in anechoic environment): 97 dB (average)
  • Maximum Sound pressure level (i meter): 127 dB SPL peak with music
  • Radiation Angle measured at -half dozen dB bespeak of polar response: Nominal: 100 degrees horizontal 10 50 degrees vertical (Axis of the vertical main polar lobe is angled downward ten degrees, resulting in the angular pattern with respect to directly ahead being +xv, -35 degrees)
  • Transducer Complement: Heavy-duty fifteen" woofer with 2-3/eight" voice coil & 50 oz. magnet, RXTM xiv 1.4" titanium diaphragm dynamic compression commuter
  • Box Tuning Frequency: 57 Hz Electroacoustic crossover frequency: 2,800 Hz
  • Crossover blazon: Internal Electronic ii-manner crossover with driver EQ, level matching, bass boost and subsonic filtering.
  • Crossover Slopes: 24 dB/octave (quaternary social club) depression pass, 24dB/octave (fourth order) high pass, both with staggered poles and commuter EQ.
  • Input Connections:
  • One combo female person XLR and 1/iv" telephone jack providing counterbalanced line-level operation from the 1/4" jack department, and high-output dynamic microphone operation from the XLR section.
  • Output Connections: One male XLR and one 1/4" phone jack. The Thru jacks are intended for the use of linking multiple PVXpTM15 enclosures in a line or to provide a feed to a powered subwoofer, or other electronics that needs to receive a total range version of the input bespeak.
  • Enclosure Materials & Finish: Black ABS plastic with textured surface, black powder-coated perforated grille. As well available in white.
  • Mounting provisions: Unit has two sets of 2 M10 inserts, one pair on the top, and ane pair on the lesser. Boosted mounting points are a set of iv M8 inserts on the elevation, and a set of 4 on the right side in the handle recess, and a fix of four on the bottom, which utilize the Peavey VersamountTM lxx+ mounting subclass. Four rubber feet provide vibration free floor or phase apply, and a molded-in stand up mounting loving cup is on the bottom.
  • Dimensions (H 10 W x D):
  • Front: 28.25" x18.90" x18.71"
  • Rear: 26.25" x10.25" x18.71"
  • Net Weight: 51lb
  • Electronics and amplifier specifications:
  • Internal power amplifiers (@120 VAC line):
  • Total of 800 watts peak available power Woofer - 650 watts pinnacle available power Continuous Power*: 325 watts @ less than 1% distortion Tweeter - 150 watts peak bachelor power Continuous Power: 75 watts @ less than 1% distortion. * Before thermal pullback activates.
  • Electronic Input Impedance (Nominal):
  • Line: 2.2 m ohms balanced (1/iv"), 10 chiliad ohms unbalanced 1/4" Mic: ii.2 one thousand ohms balanced (XLR) No phantom power available.
  • Input Sensitivity for Full Output (Level full CW): 1/4" TRS Telephone jack - 0.54 V RMS, XLR jack - 0.12 V RMS Infrasonic filter protection: 36 dB/octave roll-off Nominal Amplifier Frequency Response: +0, -3 dB from twenty Hz to twenty kHz Hum and Dissonance: Greater than 90 dB below rated power
  • DDTTM Dynamic Range: Greater than 21 dB THD and IM: Typically less than 0.v % Damping Factor: Greater than 100 @ g Hz, 8 Ohms Ability requirements of Peavey PVXp fifteen Organisation: Nominal 370 Watts, 100-120 VAC l-60 Hz

You are changing the Transport-To country.

Our production itemize varies past country due to manufacturer restrictions. If y'all modify the Send-To land, some or all of the items in your cart may not ship to the new destination.

Cancel

alexandertagen1965.blogspot.com

Source: https://www.wwbw.com/Peavey-PVXp-Sub-15-800-Watt-Powered-Sub-J01197.wwbw

0 Response to "Review of Peavey Pvxp Sub 15 800 Watt Powered Sub"

ارسال یک نظر

اشتراک در: نظرات پیام (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel